2009 Mazda RX-8 R3 on the track
March 5, 2010
Presentation of the new mazda RX-8 R3. New bilsten shock absorbers, new 19″ wheels, new interior with recaro seats , new multimedia interface with bluetooth connection and many more.
IMHO the best add-on is the new lubrication system to enhance the reliability, which was a downside on the previous mazda RX8 model.
Mazda RX8 R3 vs Scirocco 1.4 TSI
March 5, 2010
2009 Mazda RX8 R3 stock 231 bhp VERSUS 2009 Volkswagen Scirocco 1.4 TSI tuned from 170 bhp to 220 bhp. The torque given by the turbo and compressor setup places the scirocco as the winner in an inline race.
Driving the new RX8 R3
March 5, 2010
Mazda RX8 R3 Driving - Stock Exhaust heard from Interior
2009 quad-rotor RX8
October 19, 2009
2009 facelift RX8 with a 2.6 liter 4 rotors engine
Next Generation Rotary Engine?
September 21, 2009
New improved design for the rotary engine. Patented Intake System for Wankel Rotary Engine, Removes traditional ‘Throttle’ valve and controls engine load by varying the amount of Air/Fuel avilable for combustion by bleeding off the compression cycle and recirculating it into next the intake cycle. “Compression Charge Recirculation Engine Load Control” Improved torque curve with less fluctuation, Reduced pumping losses, Better fuel atomisation/ economy
Next Generation Rotary Engine? - Click here for more home videos
Mazda RX8 - 247 BHP Japan version
August 21, 2009
Here is the 247 bhp of the RX8 japan version. The european and american versions where set to only 231 because of emissions standards. Using an cobb accessport this limit can be taken out.
Mazda RX8 vs Mazda 6 MPS
June 16, 2009
1.3 l 231 BHP RX8 naturally aspirated Versus 260 turbocharged 2.3 l mazdaspeed 6
Mazda RX-8 day in greece
March 26, 2009
Doing some track races and times with the RX8
Very powerful RX8 - 3 Rotors and Turbo
March 26, 2009
Mazda RX8 with 650 BHP at the crank on the DYNO !!!!
The owner of this RX8 has recently added a turbo to the NA 20B powered 2004 RX-8. He decided to to buy a Precision T71, GTs, Billet Compressor wheel. Derrick’s ‘93 3 Rotor RX-7 (www.3rotorrx7.com) has a Precision T74 GTs and makes 525rwhp and 480 ft lbs torque @12psi. By going smaller(and Billet Wheel) he thought he would get a faster spool at the expense of some top end, but he was wrong. He was 100 hp short of my goal and the spool from the billet (heavier) wheel was slower, it has sold on eBay to the highest bidder. The good news, as he writes this on its way is a new Comp Turbo t76 Ceramic Ball Bearing Turbo
Japan old driver doing record on Laguna Seca track
February 11, 2009
The Mazda RX8 doing a hotlap around Laguna Seca in a segment in Best Motoring. Gan-san is at the wheel so he’s pro, doing some perfect ‘Heel-toe-shifts‘. Enjoy the video.









RX8 ads